Mitel 6800i Series Administrator's Manual page 861

PARAMETER –
sip intercom warning tone
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
PARAMETER –
sip intercom allow barge in
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
Operational, Basic, and Advanced Parameters
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Enables or disables a warning tone to play when the phone receives
an incoming intercom call on an active line.
Integer
1 (true)
0 (false - warning tone will not play)
1 (true - warning tone will play)
sip intercom warning tone: 0
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Enable or disables how the phone handles incoming intercom calls
while the phone is on an active call as well as how the phone handles
multicast paging calls while the phone is in a dialing state.
When you enable this parameter, an incoming intercom call takes
precedence over any active call, by placing the active call on hold
and automatically answering the intercom call. Also when enabled,
for multicast pages during a dialing state, the phone will
automatically switch focus to the multicast page screen.
When you disable this parameter and there is an active call, the
phone treats an incoming intercom call like a normal call and plays
the call warning tone. Also when disabled, for multicast pages during
a dialing state, the phone will keep its focus on the dialing screen.
Boolean
1 (Enabled)
0 - 1
0 (Disabled)
1 (Enabled)
sip intercom allow barge in: 0
A-202