Configurable Display Modes For Blf And Blf/List Softkey Labels; Blf Page Switch - Mitel 6800i Series Administrator's Manual

Mitel 6800i Series SIP Phone Release 4.1.0 Administrator Guide

BLF PAGE SWITCH

Note: Applicable to the 6867i and 6869i IP Phones only.
PARAMETER –
blf activity page switch
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
CONFIGURABLE DISPLAY MODES FOR BLF AND BLF/LIST SOFTKEY
LABELS
Note: Applicable to the 6867i and 6869i IP Phones only.
PARAMETER –
blf display label to max
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
A-253
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Enables the phone to automatically switch the screen focus to an
expansion module or softkey page that has BLF activity.
Integer
0 (disabled)
0-3
0 (disabled)
1 (switch page if monitored extension transitions to ringing [fast
flashing] state)
2 (switch page if monitored extension transitions to either ringing
[fast flashing] or hold [slow flashing] state)
3 (switch page if monitored extension transitions to either ringing or
hold state OR from idle [off] state to "in call" [solid] state)
blf activity page switch: 1
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Specifies how the phone should display BLF and BLF/List softkey
labels.
In the primary (default) display mode, when a label exceeds the
maximum characters the respective phone's screen can display, the
phone adds an ellipsis (i.e. "...") at the end of the label indicating the
label has been automatically truncated.
In the secondary display mode, the phone does not automatically
truncate the label and simply displays as many characters as the
area reserved for the label allows.
Boolean
0 (Primary Display Mode)
0 - 1
0 (Primary Display Mode)
1 (Secondary Display Mode)
blf display label to max: 1