Sip Local Dial Plan Settings - Mitel 6800i Series Administrator's Manual

Mitel 6800i Series SIP Phone Release 4.1.0 Administrator Guide

SIP LOCAL DIAL PLAN SETTINGS

PARAMETER –
sip dial plan
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
A-65
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
A dial plan describes the number and pattern of digits that a user
dials to reach a particular telephone number. The SIP local dial plan
is as follows:
Symbol Description
0, 1, 2, 3, 4, 5, 6, 7, 8, 9 Digit symbol
X Match any digit symbol (wildcard)
*, #, . Other keypad symbol; # can terminate
a dial string
| Expression inclusive OR
+ 0 or more of the preceding digit symbol
or [] expression
[] Symbol inclusive OR
- Used only with [], represent a range of
acceptable symbols; For example, [2-8]
"," (open/close quotes)
plan value using quotes.
.;. Used when a secondary dial tone is
required on the phone. (For example,
You can configure prefix dialing by adding a prepend digit to the dial
string. For example, if you add a prepend map of
"[2-9]XXXXXXXXX,91", the IP phone adds the digits "91" to any
10-digit number beginning with any digit from 2 to 9 that is dialed out.
Other examples of prepend mappings are:
1X+#,9 (Prepends 9 to any digit string beginning with "1" and termi-
nating with "#".)
6XXX,579 (Prepends "579" to any 4-digit string starting with "6".)
[4-6]XXXXXX,78 (Prepends "78" to any 7-digit string starting with
"4", "5", or "6".
Alphanumeric characters
X+#|XX+*
Up to 512 alphanumeric characters.
If a User enters a dial plan longer than 512 characters, or a parsing
error occurs, the phone uses the default dial plan of "x+#|xx+*". If this
is the case, the Administrator cannot change the dial plan from the
configuration files. The dial plan must be changed from the Mitel
Web UI.
sip dial plan: "X+#|XXX+*"
In the configuration files, enter the sip dial
"9;xxxxxx", when a user has to dial "9" to
get and outside line and needs a
secondary dialtone presented.