Mitel 6800i Series Administrator's Manual page 573

CONFIGURING THE 802.1X PROTOCOL USING THE MITEL WEB UI
Use the following procedure to configure the 802.1x Protocol on your phone using the Mitel
Web UI.
MITEL WEB UI
1. Click on Advanced Settings->802.1x Support.
To configure EAP-MD5:
2. In the "EAP Type" field, select EAP-MD5.
Valid values are: Disabled (Default), EAP-MD5, and EAP-TLS.
3. In the "Identify" field, enter an Identity for the IP phone for which you are configuring 802.1x.
4. For example, phone1.
5. In the "MD5 Password" field, enter a password used for the MD5 authentication of the
phone.
6. For example, password1.
7. Click Save Settings to save your changes.
To configure EAP-TLS:
1. Click on Advanced Settings->802.1x Support.
Advanced Operational Features
6-27