Mitel 6800i Series Administrator's Manual page 485

Use the following procedures to enable/disable the Missed Calls Indicator on the IP phones.
CONFIGURATION FILES
For specific parameters you can set in the configuration files for enabling/disabling the Missed
Calls Indicator, see Appendix A, the section,
MISSED CALLS INDICATOR LINE APPLICABILITY
Administrators can also select the specific lines on the phone to which the missed calls indicator
is applicable. This can be performed by defining the "sip lineN missed calls enabled"
parameter in the configuration files ("0" for disabled, "1" for enabled) or through the Mitel Web UI.
CONFIGURATION FILES
For specific parameters you can set in the configuration files, see Appendix A, the section,
"Missed Calls Indicator Settings"
Configuring Missed Calls Indicator Applicability for Specific Lines Using the Mitel
Web UI
Use the following procedure to configure missed calls indicator applicability for specific lines
using the Web UI:
MITEL WEB UI
1. Click on Advanced Settings > LineN (where N = line number).
2. Under Additional Settings, for the Missed Calls option, enable by checking the checkbox
or disable by unchecking the box (default is enabled).
3. Click Save Settings.
4. Repeat Steps 1 to 3 for any other lines you want to configure.
"Missed Calls Indicator Settings"
on .
page A-158
Operational Features
on .
page A-158
5-239