Centralized Conferencing Settings - Mitel 6800i Series Administrator's Manual

Mitel 6800i Series SIP Phone Release 4.1.0 Administrator Guide
PER-LINE SETTING
PARAMETER –
sip lineN sca bridging
(where N = line number)
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE

CENTRALIZED CONFERENCING SETTINGS

GLOBAL SETTING
PARAMETER –
sip centralized conf
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
A-89
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Enables/disables SCA bridging on the phone-side on a per-account
basis using a specific SCA-configured line.
Note: You must restart the phone after setting a value for this
parameter.
Boolean
0
0 (disabled )
1 (enabled)
sip line1 sca bridging: 1
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Globally enables or disables SIP centralized conferencing for an IP
phone as follows:
• To disable centralized conferencing, leave this field empty
(blank).
• To enable SIP centralized conferencing, then do one of the
following actions:
• If you have specified a proxy server/registrar server, then to
reach the media server via the proxy server, set this field to one
of the following:
conf (Sylantro server), or
Conference (BroadSoft server)
By setting this field to conf, you specify conf@<proxy_server
_address>: <proxy_port>. For example, if the proxy server
address is 206.229.26.60 and the proxy port used is 10060,
then by setting this parameter to conf, you are specifying the
following: conf@206.229.26.60:10060
• To reach the media server using a different address/port than
that specified by the proxy, set this field to the following:
conf@<media_server _address>: <media_port>
String
Blank
N/A
sip centralized conf: conf