Mitel 6800i Series Administrator's Manual page 197

Configuring NTP Servers (optional)
Use the following procedure to enable/disable and configure the NTP servers using the
configuration files.
CONFIGURATION FILES
For specific parameters you can set in the configuration files, see Appendix A, the section,
"Time Server Settings"
Use the following procedure to enable/disable the NTP server using the IP Phone UI.
IP PHONE UI
For the 6863i/6865i:
1. Press on the phone to enter the Options List.
2. Select Preferences.
3. Select Time and Date.
4. Select Timer Server 1, Timer Server 2, or Time Server 3.
5. Enter the IP Address (in dotted decimal) or qualified domain name for the Time Server.
6. Press Done to save the change.
For the 6867i/6869i:
1. Press on the phone to enter the Options List.
2. Select Time and Date > Set Date and Time.
3. In the Timer Server 1, Time Server 2, and/or Time Server 3 fields, enter the respective
IP address (in dotted decimal) or qualified domain name.
4. Press the Save softkey.
Use the following procedure to enable/disable and configure the NTP Servers using the Mitel
Web UI.
MITEL WEB UI
1. Click on Basic Settings->Preferences->Time and Date Setting.
on page A-50.
Network Settings
4-50