Mitel 6800i Series SIP Phone Release 4.1.0 Administrator Guide
SIP DIVERSION DISPLAY
GLOBAL SETTING
PARAMETER –
sip diversion display
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
PER-LINE SETTING
PARAMETER –
sip lineN diversion display
(where N = line number)
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
A-185
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
If enabled, when an outgoing call is being diverted to another
destination the phone displays the Caller ID of the new destination
and the reason for the call diversion. Similarly, for incoming diverted
calls, the Caller ID of the original call destination displays.
If disabled, the reason for the call diversion on outgoing diverted
calls, and the Caller ID of the original call destination on incoming
diverted calls is not displayed.
Notes:
• This is a global parameter.
• You must restart the phone after setting a value for this
parameter.
Boolean
1
0 (disabled)
1 (enabled)
sip diversion display: 0
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
If enabled, when an outgoing call is being diverted to another
destination the phone displays the Caller ID of the new destination
and the reason for the call diversion. Similarly, for incoming diverted
calls, the Caller ID of the original call destination displays.
If disabled, the reason for the call diversion on outgoing diverted
calls, and the Caller ID of the original call destination on incoming
diverted calls is not displayed.
Notes:
• This parameter is used to configure a specific line.
• You must restart the phone after setting a value for this
parameter.
Boolean
1
0 (disabled)
1 (enabled)
sip line1 diversion display: 0