Background Image On Idle Screen - Mitel 6800i Series Administrator's Manual

Mitel 6800i Series SIP Phone Release 4.1.0 Administrator Guide
CONFIGURING THE BRIGHTNESS LEVEL SETTINGS USING THE CONFI-
GURATION FILES
Use the following information to configure the brightness level settings on the 6867i and 6869i.
CONFIGURATION FILES
For specific parameters you can set in the configuration files, see Appendix A, the sections,
"Backlight Mode Settings"

BACKGROUND IMAGE ON IDLE SCREEN

Note: Applicable to the 6867i and 6869i IP Phones only.
Administrators can brand the idle screen of the 6867i and 6869i IP phones with their own
company logo or image. The phones can now display a background image in the bottom layer
of the idle screen. This image can be set by the new "background image" parameter. Current
text (i.e. screen name, extension, and date/time) and softkeys on the idle screen are on top of
the background image. The background image can be downloaded from your configuration
server using either tftp, ftp, http, and https protocols.
IDLE SCREEN IMAGE REQUIREMENTS FOR THE 6867I/6869I:
• 320x240 pixels (6867i)
• 480x272 pixels (6869i)
• 24 or 32-bit color depth
• Both .png and .jpg files are supported
• There should be no frame around the image
CONFIGURING BACKGROUND IMAGE ON IDLE SCREEN
Use the following procedures to configure the background image on the idle screen
CONFIGURATION FILES
For specific parameters you can set in the configuration files, see Appendix A, the section,
"Background Image on Idle Screen"
5-32
on and
page A-59 "Brightness Level Settings"
on .
page A-61
on .
page A-60