Mitel 6800i Series Administrator's Manual page 193

• VLAN Settings->PC Port VLAN->PC Port VLAN ID: 4095
12. In the PC Port VLAN > Priority field, enter a value from 0 to 7 to specify the PC Port VLAN
priority. Default is 0.
13. Press the Save softkey.
14. Restart the phone for the selection to take affect.
MITEL WEB UI
1. Click on Advanced Settings->Network->VLAN.
To globally enable/disable VLAN and set priority for non-IP packets:
2. Enable VLAN by checking the VLAN Enable field check box. (Disable this field by un-
checking the check box).
3. With VLAN enabled, select the priority (0 to 7) for non-IP packets in the Priority, Non-IP
Packet field.
4. Enable or disable VLAN HPQ by checking or unchecking the HPQ Enable field check box.
To set VLAN ID and priority for the LAN Port (Port 0):
5. Enter a VLAN ID value from 1 to 4095 in the VLAN ID field. Default is 1.
Note: Setting the LAN Port VLAN ID to 4095 and PC Port VLAN ID to any ID from
1 to 4094 will allow frames from the PC port (containing a VLAN ID) to be untagged
before being forwarded to the LAN port and frames from the LAN port (without a
VLAN ID) to be tagged with the configured VLAN ID before being forwarded to the
PC port.
Example:
You enable tagging on the phone port as normal but set the LAN Port VLAN ID to 4095
Network Settings
4-46