Mitel 6800i Series Administrator's Manual page 379

softkey3 type: dnd
softkey3 states: idle
softkey4 type: redial
softkey5 type: empty
softkey5 states: connected
softkey6 type: speeddial
softkey6 states: connected
The following table shows how the keys in the example above would display on the IP Phone UI.
Note: The "empty" key type allows a softkey to be removed quickly by deleting the
softkey information from the configuration file.
SOFTKEY IDLE
softkey1 Key 1
softkey2 (not used)
softkey3 Key 2
softkey4 Key 3
softkey5 (not used)
softkey6 (not used)
Softkeys and programmable keys are configurable using the Mitel Web UI or the configuration
files.
PROGRAMMABLE KEYS
The following table provides the number of softkeys and programmable keys you can configure,
and the number of lines available for each type of phone that has programmable keys.
IP PHONE MODEL EXPANSION MODULE KEYS
6863i N/A
6865i 16 to 48*
(Model M680i)
84 to 252**
(Model (M685i)
CONNECTED NOTES
Key 2 Callers List displays for softkey1.
Key 1 in connected state is the Drop key. Idle
and connected display as applicable.
(not used) Softkey2 is not displayed.
(not used) DND displays for softkey3. Idle displays as
applicable.
Key 3 Redial displays for softkey4. Default state
values (idle, connected, incoming, outgoing,
busy) display as applicable.
Key 4 (blank) A blank displays for softkey5. Connected
displays as applicable.
Key 5 Speeddial displays for softkey6. Connected
displays as applicable.
PROGRAMMABLE
KEYS
3
8
Operational Features
LINES
AVAILABLE
2
24
5-133