Mitel 6800i Series Administrator's Manual page 799

PARAMETER –
ldap dn attribute
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
PARAMETER –
ldap search filter
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
PARAMETER –
ldap search scope
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
Operational, Basic, and Advanced Parameters
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Used to perform the search request for the detailed view of an LDAP
contact.
String
N/A
N/A
ldap dn attribute: customDN
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Used to set search filters. This parameter format must follow RFC
4515, for example (sn=%). This parameter must include a '%'
character at the place where it will be replaced by a*, b*, etc...
String
N/A
N/A
ldap search filter: (&(sn=%)(number=*))
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Used to set the search scope. A "base" search is performed only on
the baseDN, a "onelevel" search is performed on the baseDN and
the first sublevel, and a "subtree" search is performed on the whole
tree under the base DN.
String list
base/onelevel/subtree
N/A
base/onelevel/subtree
ldap search scope: onelevel
A-140