Mitel 6800i Series Administrator's Manual page 71

• Reset (includes options for "Erase Local Config" and "Factory Default"
Note: An administrator has the option of enabling and disabling the use of password
protection on the IP phone UI for all model phones. This is configurable using the
configuration files only. For more information about this feature, see Appendix A, the
section "Password Settings"
References
For information about all other user options in the "Options Menu", see your <Model-Specific>
IP Phone User Guide.
For procedures on configuring Administrator Options on the IP phone via the IP phone UI, see:
• Chapter 4, "Configuring Network and Session Initiation Protocol (SIP) Features"
• Chapter 5, "Configuring Operational Features"
• Chapter 6, "Configuring Advanced Operational Features"
SIMPLIFIED IP PHONE UI OPTIONS MENU
An Administrator can replace the existing options menu on the Phone UI with a more simplified
options menu. In the configuration files, the "options simple menu" parameter allows you to
display either the full menu (if set to 0), or the simplified menu (if set to 1). The following table
illustrates the differences between the full menu and the simplified menu.
Note: When setting the "options simple menu" parameter, the menu changes in the
Phone UI only. The Mitel Web UI is not affected.
on page 15.
Administrator Level Options
)
3-4