Mitel 6800i Series Administrator's Manual page 112

Hide thumbs Also See for 6800i Series:

Table of Contents

Mitel 6800i Series SIP Phone Release 4.1.0 Administrator Guide

SIP SETTINGS

The following paragraphs describe the SIP parameters you can configure on the IP phone. SIP

configuration consists of configuring:

Basic SIP Authentication Settings

Basic SIP Network Settings

Advanced SIP settings

RTP Settings

Autodial Settings

1. Specific parameters are configurable on a global and per-line basis. You can also

configure specific parameters using the IP Phone UI, the Mitel Web UI, or the

configuration files. If you have a proxy server or have a SIP registrar present at a

different location than the PBX server, the SIP parameters may need to be changed.

2. For the 6863i and 6865i, Global SIP settings are applicable only to Lines 1 and 2.

For the 6867i and 6869i, Global SIP settings are applicable only to Lines 1 to 4. To

configure lines that do not have an associated Line hard key, Administrators must

configure each individual line manually.

3. The IP phones allow you to define different SIP lines with the same account

information (i.e. same user name) but with different registrar and proxy IP addresses.

This feature works with Registration, Subscription, and Notify processing. This

feature also works with the following types of calls: incoming, outgoing, BroadSoft

Shared Call Appearance (SCA), Bridged Line Appearance (BLA), conference,

transfer, blind transfer.

Troubleshooting