Xml Sip Notify Settings - Mitel 6800i Series Administrator's Manual

Mitel 6800i Series SIP Phone Release 4.1.0 Administrator Guide
PARAMETER –
action uri disconnected
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE

XML SIP NOTIFY SETTINGS

PARAMETER –
sip xml notify event
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
A-165
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Specifies the URI that the phone executes a GET on, when it
transitions from the incoming, outgoing, calling, or connected state
into the idle state.
This parameter uses the following variables to determine the state of
the line:
$$LINESTATE$$
$$LOCALIP$$
String
N/A
Any valid URI
action uri disconnected:
http://fargo.ana.mitel.com/disconnected.xml?state=$$LINESTATE$
$
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Enables or disables the phone to accept or reject an aastra-xml SIP
NOTIFY message.
Note: To ensure the SIP NOTIFY is coming from a trusted source, it
is recommended that you enable the Whitelist feature (Whitelist
Proxy parameter) on the IP phone. If enabled, and the phone receives
a SIP NOTIFY from a server that is NOT on the whitelist (i.e. untrusted
server), the phone rejects the message.
Boolean
0
0 - disabled
1 - enabled
sip xml notify event: 1