Mitel 6800i Series Administrator's Manual page 597

Normal Call
WARNING:THE RECORDING ICON IS DISPLAYED ON THE IP PHONES TO
INDICATE THE RECORDING SESSION IS ACTIVE AND THAT A DUPLICATE
COPY OF THE RTP/SRTP STREAM IS TO BE SENT FROM THE PHONE TO THE
RECORDING SERVER. THE OVERALL RECORDING AND ITS QUALITY IS
DEPENDENT ON THE RECORDING SERVER AND THE NETWORK.
Moreover, the phone will, by default, play a periodic audible beep tone through the selected
audio path notifying users that their call is being recorded. Playback of the beep tone is
configurable and if required, administrators can disable or set the playback interval of the beep
tone by defining the "recording periodic beep" parameter in the configuration files.
Additionally, by utilizing the "recording beep direction" parameter, administrators can define
whether the beep tone is audible locally, remotely, or both.
Note: In addition to the aforementioned parameters corresponding to the active IP voice
recording feature, the transport protocol parameters for SIP services (i.e. "sip services
transport protocol" and "sip services port") must also be defined in the configuration
files. See "Configurable Transport Protocol for SIP Services and RTCP Summary
Reports" on page 6-47
Use the following procedure in the configuration files to configure the active VoIP recording
.
feature
CONFIGURATION FILES
For the specific parameter you can set in the configuration files, see Appendix A, the section,
"Active VoIP Recording Settings"
6869i
Recording Icons
for more information.
on .
page A-286
Advanced Operational Features
Conference Call
6-51