Mitel 6800i Series Administrator's Manual page 378

Mitel 6800i Series SIP Phone Release 4.1.0 Administrator Guide
SOFTKEY TYPE
Redial
Conference
Transfer
Icom (Intercom)
Phone Lock
Paging
Login
Discreet Ringing
Empty
You can enable or disable the softkey states using the configuration files or the Mitel Web UI.
In the Mitel Web UI, you disable a state by unchecking the box for that operational state.
In the configuration files, you use the following parameters to enable and disable operational
states:
• softkeyN states
You can enter multiple values (idle, connected, incoming, outgoing, busy) for the "softkeyN
state" parameter. For example:
softkeyN states: idle connected
You must associate the softkeyN state parameter with a specific softkey. In the following
example, the softkeyN states parameter is associated with softkey 12:
softkey12 type: speeddial
softkey12 label: voicemail
softkey12 value *89
softkey12 states: outgoing
Notes:
1. By default the IP phone idle screen collapses the softkeys. So in the previous
example, softkey 12 will appear in position 1 if no other softkeys are set.
2. A softkey type of "empty" does not display on the idle screen at all. For more
information about the softkey type of "empty" see Appendix A, the section,
Settings"
CONFIGURATION EXAMPLE
The following example illustrates the use of the "softkeyN states" parameter, and the "softkeyN
type" parameter with a value of empty. For clarity purposes, only the "softkeyN type" and
"softkeyN states" parameters are shown.
softkey1 type: callers
softkey1 states: idle connected
5-132
DEFAULT STATES
idle, connected, incoming, outgoing, busy
idle, connected, incoming, outgoing, busy
idle, connected, incoming, outgoing, busy
idle, connected, incoming, outgoing, busy
All states disabled.
All states disabled.
idle, connected, incoming, outgoing, busy
idle, connected, incoming, outgoing, busy
idle, connected, incoming, outgoing, busy
on page 214.
"Softkey