Mitel 6800i Series Administrator's Manual page 422

Mitel 6800i Series SIP Phone Release 4.1.0 Administrator Guide
Configuring a Speeddial/MWI Key Using the Configuration Files
To configure a Speeddial/MWI key using the configuration files, you must enter "speeddialmwi"
for the key type. For the label (6867i/6869i/M685i only), enter a key label to assign to the
Speeddial/MWI key (e.g. Peter). For the value, enter call URI and voicemail URI separated by
a semi-colon, as per the following syntax: [call URI];[voicemail URI]. For example,
+33123456,,,3456#0000#@domain;sip:voicemail_peter@domain.
Notes:
1. As the example above illustrates, pauses and DTMF are supported for the call URI.
2. Ensure that no spaces are added between the call URI and the voicemail URI when
defining the key value.
3. If only one URI is provided, the value will be used for the voicemail URI and the call
URI will be left as undefined.
For the line, enter the line for which you want to use the key functionality (e.g. 3). The following
parameters are examples you can use to configure a Speeddial/MWI key using the configuration
files:
For Top Softkeys
topsoftkey1 type: speeddialmwi
topsoftkey1 label: Peter
topsoftkey1 value:
+33123456,,,3456#0000#@domain;sip:voicemail_peter@domain
topsoftkey1 line: 3
For Programmable Keys
prgkey1 type: speeddialmwi
prgkey1 value:
+33123456,,,3456#0000#@domain;sip:voicemail_peter@domain
prgkey1 line: 3
For Expansion Module Softkeys
expmod1 key1 type: speeddialmwi
expmod1 key1 label: Peter
expmod1 key1 value:
+33123456,,,3456#0000#@domain;sip:voicemail_peter@domain
expmod1 key1 line: 3
For Hard Keys
hardkey1 type: speeddialmwi
hardkey1 value:
+33123456,,,3456#0000#@domain;sip:voicemail_peter@domain
hardkey1 line: 3
Refer to the following in Appendix A to configure a Speeddial/MWI key on the IP phone using
the configuration files.
5-176