Mitel 6800i Series Administrator's Manual page 389

if the "collapsed softkey screen" parameter is disabled, the "Home" speeddial softkey will
retain its position appearing on the third top softkey position on the LCD display.
Notes:
1. The "collapsed softkey screen" parameter applies to both top and bottom softkeys
and is enabled by default.
2. When the "collapsed softkey screen" parameter is disabled, bottom softkeys
configured with a function that is to be displayed only in specific states will be
displayed as a blank softkey in all other states. For example, if a bottom softkey is
configured with speeddial functionality in the connected, incoming, outgoing, and
busy states, when the phone is idle, the softkey will be blank (i.e. no label is
displayed) and will not be functional.
OFFSET PARAMETERS
Complementing the "collapsed softkey screen" parameter are the following two additional
parameters giving Administrators more control over softkey positioning:
• collapsed softkey screen offset bottom: Defines the offset for locking or collapsing the
bottoms softkeys.
• collapsed softkey screen offset top: Defines the offset for locking or collapsing the top
softkeys.
If the "collapsed softkey screen" parameter is enabled (i.e. defined as "1") and an offset
parameter such as "collapsed softkey screen offset bottom: 4" is defined, the first four bottom
softkeys will not be taken into consideration when collapsing (i.e. essentially locking the first
four bottom softkeys and collapsing the rest).
Alternatively, the inverse is true whereby, if the "collapsed softkey screen" parameter is
disabled (i.e. defined as "0") and an offset parameter such as "collapsed softkey screen offset
bottom: 4" is defined, all bottom softkeys except the first four will not be taken into consideration
when collapsing (i.e. essentially collapsing the first four bottom softkeys and locking the rest).
Notes:
1. The range of the "offset" parameters is dependant on the SIP phone model. Values
not in range will be ignored.
2. For the 6867i, the range for the "collapsed softkey screen offset bottom" and
"collapsed softkey screen offset top" parameters are 1 - 17 and 1 - 19 respectively.
3. For the 6869i, the value for the "collapsed softkey screen offset bottom" and
"collapsed softkey screen offset top" parameters are 1 - 23 and 1 - 43 respectively.
6869i Example - Non-Collapsed Mode
Operational Features
5-143