Status Code On Ignoring Incoming Calls; Switch Focus To Ringing Line; Call Hold Reminder Settings - Mitel 6800i Series Administrator's Manual

STATUS CODE ON IGNORING INCOMING CALLS

PARAMETER –
sip ignore status code
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE

SWITCH FOCUS TO RINGING LINE

PARAMETER –
switch focus to ringing line
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE

CALL HOLD REMINDER SETTINGS

PARAMETER –
call hold reminder
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
Operational, Basic, and Advanced Parameters
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Specifies the status code that is sent in the response to the server
when a user ignores an incoming call.
Integer
486
Valid SIP final negative response code (Refer to RFC3261)
sip ignore status code: 486
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Specifies whether or not the UI focus is switched to a ringing line
while the phone is in the connected state.
Boolean
1 (enable)
0 (disable)
1 (enable)
switch focus to ringing line: 1
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Enables or disables the reminder ring splash timer to start as soon
as you put a call on hold (even when no other calls are active on the
phone). When enabled, the phone initiates a reminder ring splash
periodically for the single call on hold. When disabled, no reminder
ring splash is audible.
Boolean
0
0 (disable)
1 (enable)
call hold reminder: 1
A-172