Additional Information; Multiple Configuration Server Settings - Mitel 6800i Series Administrator's Manual

MULTIPLE CONFIGURATION SERVER SETTINGS

PARAMETER –
firmware server
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE

ADDITIONAL INFORMATION

The CSV directory files, language packs, TLS certificate files, 802.1x certificate files, and
HTTPS files can also be downloaded to the phone from a server other than the configuration
server. For each of these types of files, you can specify a URL (server IP address) from which
the phone gets these files. You can use existing parameters on the phone to specify the URL.
For more information about this feature, refer to
Language Packs, TLS Certificates, 802.1x Certificates, HTTPS Files and Multiple Configuration
Servers" on page
For information on configuring the directory, language pack, TLS certificates, 802.1x certificates,
and HTTPS parameters, see the applicable parameters in this Appendix.
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Specifies either a full or partial URL of a server (other than the
original configuration server) from which the phones in the network
get their firmware.
Note: The default method for the update of firmware to the phones
is from the original configuration server. The Administrator must
specify a correct server URL for the phones to get their firmware
information from that server. If the URL is incorrect, no firmware
download occurs to the phones from the specified server.
String (up to 256 characters)
FTP
"ftp://username:password@0.0.0.0:port/path"
TFTP
"tftp://0.0.0.0:port/path"
HTTP
"http://0.0.0.0:port/path"
HTTPS
"https://0.0.0.0:port/path"
Partial URL
"/path"
Blank
N/A
firmware server:
Leaving this parameter blank downloads all configuration and
firmware files from the original configuration server.
firmware server: tftp://10.30.102.158/test1
The above example uses TFTP to download all firmware files that
exist in the "test1" directory on the specified server, to the phones.
firmware server: /path
The above example uses the configuration server that is linked to the
partial path to load the firmware.
1-24.
Operational, Basic, and Advanced Parameters
Chapter 1, the section, "CSV Directory Files,
A-28