Mitel 6800i Series Administrator's Manual page 741

Hide thumbs Also See for 6800i Series:

Table of Contents

SIP PER-LINE CALL WAITING SETTING

sip lineN call waiting

(where N = line number)

DEFAULT VALUE

Operational, Basic, and Advanced Parameters

CONFIGURATION FILES

startup.cfg, <model>.cfg, <mac>.cfg

Allows you to enable or disable Call Waiting on the IP phone on a per

If you enable call waiting (default), the user has the option of

accepting a second call while currently on the first call. If you disable

call waiting, and a user is currently on a call, a second incoming call

is automatically rejected by the phone with a busy message.

If you disable call waiting on the phone, and the user is on a call, any

further incoming calls will receive busy unless "Call Forward Busy"

or "Call Forward No Answer and Busy" is configured on the phone.

It will then forward the call according to the rule configured. The

phone can only:

• transfer the currently active call

• accept transferred calls if there is no active calls.

If call waiting is disabled:

• intercom calls are treated as regular incoming calls and are

• pre-dialing with live dial pad disabled still accepts incoming calls.

• the Missed Calls List does not get updated with details of calls.

• the Blind Transfer feature on the phone may not work if two calls

are made to the phone at one time.

0 (disabled)

sip line1 call waiting: 0

sip line2 call waiting: 1

sip line3 call waiting: 0

Troubleshooting