Mitel 6800i Series Administrator's Manual page 293

Once the language pack is loaded to the phone, it is available for selection from either the
configuration files, the IP Phone UI or the Mitel Web UI.
SPECIFYING THE SCREEN LANGUAGE TO USE
Once the language pack(s) have loaded, you must then specify which language to use on the
phone. After the phone has booted up, you can specify which language(s) to use. You can use
the configuration files (via the "language" parameter) and the IP Phone UI to specify the
language for the IP Phone UI. You can use the configuration files (via the "web language"
parameter) and Mitel Web UI to specify the files for the Mitel Web UI.
Use the following procedures to specify the language to use on the IP phone.
CONFIGURATION FILES
For specific parameters you can set in the configuration files, see Appendix A, the section,
on
"Language Settings" page A-187
Notes:
1. If you specify the language to use on the phone via the configuration files, you must
reboot the phone for the changes to take affect.
2. All languages may not be available for selection. The available languages are
dependent on the language packs currently loaded to the IP phone.
and
"Language Pack Settings"
Operational Features
on .
page A-189
5-47