Configurable Positioning Of Programmed Softkeys - Mitel 6800i Series Administrator's Manual

Mitel 6800i Series SIP Phone Release 4.1.0 Administrator Guide

CONFIGURABLE POSITIONING OF PROGRAMMED SOFTKEYS

Note: Applicable to the 6867i and 6869i IP Phone only.
PARAMETER –
collapsed softkey screen
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
PARAMETER
collapsed softkey
screen offset top
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLES
A-221
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Enables or disables the 6867i/6869i from collapsing the softkeys to
remove blank keys. When enabled, the phone will remove all the
softkeys defined as "None" and display the programmed softkeys in
consecutive order. When disabled, the softkey will retain its
programmed position. This parameter applies to both top and bottom
softkeys.
Integer
1 (Enabled)
0-1
0 (Disabled)
1 (Enabled)
collapsed softkey screen: 0
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Defines the offset for locking or collapsing the top softkeys.
If the "
collapsed softkey screen" parameter is enabled, the phone will
lock the respective top softkeys (from top softkey 1 to the value defined)
and collapse the rest of the top softkeys.
If the "
collapsed softkey screen" parameter is disabled, the phone will
collapse the respective top softkeys (from top softkey 1 to the value
defined) and lock the rest of the top softkeys.
Integer
0
• 1 - 19 (6867i)
• 1 - 43 (6869i)
collapsed softkey screen offset top: 4