Mitel 6800i Series Administrator's Manual page 292

Mitel 6800i Series SIP Phone Release 4.1.0 Administrator Guide
where <ISO 639> is the language code specified in Standard ISO 639
(see Appendix A, the section, Language Codes (from Standard ISO 639) on page 191) and
<ISO 3166> is the country code specified in Standard ISO 3166 (see Country Codes (from
Standard ISO 3166) on page 192). The <ISO 3166> attribute is optional.
Note: Adding/changing language packs can only be done at bootup of the IP phone.
The default language (English) cannot be changed or removed.
Example
The following is an example of the parameters you would enter in the <MAC>.cfg file to load a
French, Italian, German, and Spanish language pack to the IP phone.
language 1: lang_fr_ca.txt
language 2: lang_it.txt
language 3: lang_de.txt
language 4: lang_es.txt
The above entries in the <MAC>.cfg file tells the phone which language packs to load. When
the language pack(s) have loaded, you must then use the configuration files IP Phone UI to
specify which language to display on the IP phone. You must use the Mitel Web UI to specify
the language to use in the Web UI.
References
For more information about specifying the language to use, see the section,
Screen Language to Use"
For more information about language codes and country codes, see Appendix A, the section,
"Language Pack Settings"
Loading Language Packs via the Mitel Web UI
Using the Mitel Web UI, you can specify a language pack to load using the parameters at Basic
Settings->Preferences->Language Settings.
You use the following fields in the Mitel Web UI to specify which language packs to load:
5-46
on page 5-47.
on page 189.
"Specifying the