Mitel 6800i Series Administrator's Manual page 83

PARAMETER IN PARAMETER IN
MITEL WEB UI CONFIGURATION
FILES
Display DTMF Digits display dtmf digits
Note: This option
can be set by both
Users and
Administrators.
Play Call Waiting call waiting tone
Tone
Note: This option can
be set by both Users
and Administrators.
Stuttered Dial Tone stutter disabled
Note: This option can
be set by both Users
and Administrators.
XML Beep Support xml beep notification
Note: This option can
be set by both Users
and Administrators.
Status Scroll Delay xml status scroll delay Allows you to set the time delay, in seconds, between
(seconds)
Note: This option can
be set by both Users
and Administrators.
Switch UI Focus to switch focus to ringing
Ringing Line line
Note: This option can
be set by both Users
and Administrators.
Administrator Level Options
DESCRIPTION
Enables and disables the display of DTMF digits on
the IP phone display during a connected state.
For more information on this feature, see.
DTMF Digits" on page 5-65.
Enable or disables the playing of a call waiting tone
when a caller is on an active call and a new call comes
into the phone.
For more information on this feature, see.
Waiting Tone" on page 5-68.
Enable or disables the playing of a stuttered dial tone
when there is a message waiting on the IP phone.
For more information on this feature, see.
Dial Tone" on page 5-72.
Enables or disables the playing of a beep to indicate
a status on the phone. When the phone receives a
status message, the BEEP notifies the user that the
message is displaying.
For more information on this feature, see
Support" on page 5-73.
the scrolling of each status message on the phone.
For more information on this feature, see
Scroll Delay" on page 5-75.
Enables or disables whether or not the UI focus is
switched to a ringing line while the phone is in the
connected state.
For more information on this feature, see
Focus to Ringing Line" on
"Display
"Call
"Stuttered
"XML Beep
"Status
"Switch
page 5-76.
3-16