IBM pSeries 690 Service Manual page 659

Error Code Description
406E 0EA0 Scan control routines detected fault in MOPS
service processor code
406E 0EA1 Scan control routines detected fault in
processor subsystem code on main processor
406E 0EA2 Scan control routines detected fault in PRD
code on service processor
406E 0EA4 Scan control routines detected fault in service
processor code
406E 0EA5 PRD detected a problem in the FNM code
406E 0EAA PRD: FNM is handling this error
406E 0EAF Scan control routines detected unknown service
processor code and system type
406E 0EB0 Scan control routines detected JTAG problem
406E 0EB1 Attention line 0 stuck fault
406E 0EB2 Attention line 1 stuck fault
406E 0EB3 Attention line 2 stuck fault
406E 0EB4 Attention line 3 stuck fault
406E 0EB5 Attention line 4 stuck fault
406E 0EB6 Attention line 5 stuck fault
406E 0EB7 Attention line 6 stuck fault
406E 0EB8 Attention line 7 stuck fault
Action/
Possible Failing FRU
1. Access the service processor error log. Find
the error log entry for the 406x 0EA0 error.
Look for a hardware error of the form 450x
yyyy, 460x yyyy, or 4B2x yyyy with a
timestamp within a few minutes of the 406x
0EA0 error. Follow the actions for this
hardware error.
2. If there is no hardware error in the service
processor error log with a timestamp that is
close to the 406x 0EA0 error, or following
the actions for the hardware error does not
resolve the problem, check for platform
firmware updates. If an update is available,
apply it.
3. If a platform firmware update is not
available, or the update does not correct the
problem, call service support.
1. Check for operating system updates.
2. Call service support.
1. Check for system firmware updates.
2. Call service support.
1. Check for system firmware updates.
2. Call service support.
1. Check for system firmware updates.
2. Call service support.
1. Check for system firmware updates.
2. Call service support.
1. Check for system firmware updates.
2. Call service support.
Go to "MAP 1540: Problem Isolation
Procedures" on page 298.
Go to "MAP 1540: Problem Isolation
Procedures" on page 298.
Go to "MAP 1540: Problem Isolation
Procedures" on page 298.
Go to "MAP 1540: Problem Isolation
Procedures" on page 298.
Go to "MAP 1540: Problem Isolation
Procedures" on page 298.
Go to "MAP 1540: Problem Isolation
Procedures" on page 298.
Go to "MAP 1540: Problem Isolation
Procedures" on page 298.
Go to "MAP 1540: Problem Isolation
Procedures" on page 298.
Go to "MAP 1540: Problem Isolation
Procedures" on page 298.
Chapter 5. Error Code to FRU Index
639