IBM pSeries 690 Service Manual page 945

Hide thumbs Also See for pSeries 690:

Table of Contents

7. Remove the metal EMC shield from the top of the tailstock.

8. Remove the blank filler or adapter that is installed in the cassette linkage assembly.

Note: If there is a blank filler in the cassette linkage assembly, as shipped from the manufacturer,

there are two adapter arms. One adapter arm is used with short adapters (short adapter arm)

and the other adapter arm is used with long adapters (long adapter arm).

If you are removing a short adapter or blank filler, see "Short Adapter or Blank Filler Removal" on

If you are removing a long adapter, see "Long Adapter Removal" on page 928.

1 Metal EMC Shield

Chapter 9. Removal and Replacement Procedures

Chapters

Table of Contents