IBM pSeries 690 Service Manual page 492
Hide thumbs
Also See for pSeries 690:
- Service manual (1134 pages) ,
- User manual (277 pages) ,
- Installation manual (230 pages)
Table of Contents
Advertisement
Error Code Description
20FF0021 Invalid VPD (ID tag length is more than 256
bytes)
20FF0022 Invalid VPD (84/90 tag length is more than
2KB - large resource tag)
20FF0023 Invalid VPD (buffer length is more than 2KB
20FF0024 Invalid VPD (84/90 tag length is more than
2KB - vendor-defined tag)
20FF0026 Invalid VPD (tag is not recognized)
20FF0030 Invalid VPD (VPD data bad)
20FF0060 Invalid VPD (VPD length is zero)
20FF0070 Invalid VPD (cannot find the beginning of the
keyword)
20FF0072 Invalid VPD (cannot find the beginning of the
keyword)
20FF0073 Invalid VPD (cannot find the beginning of the
keyword)
20FF0090 Invalid VPD (empty VPD data from the
service processor mailbox command)
472
Eserver pSeries 690 Service Guide
Action/
Possible Failing FRU
1. Replace the part specified by the location
code.
2. If no location code is shown with the error
code, call service support.
1. Replace the part specified by the location
code.
2. If no location code is shown with the error
code, call service support.
1. Replace the part specified by the location
code.
2. If no location code is shown with the error
code, call service support.
1. Replace the part specified by the location
code.
2. If no location code is shown with the error
code, call service support.
1. Replace the part specified by the location
code.
2. If no location code is shown with the error
code, call service support.
1. Replace the part specified by the location
code.
2. If no location code is shown with the error
code, call service support.
1. Replace the part specified by the location
code.
2. If no location code is shown with the error
code, call service support.
1. Replace the part specified by the location
code.
2. If no location code is shown with the error
code, call service support.
1. Replace the part specified by the location
code.
2. If no location code is shown with the error
code, call service support.
1.
Replace the part specified by the location
code.
2. If no location code is shown with the error
code, call service support.
1.
Replace the part specified by the location
code.
2. If no location code is shown with the error
code, call service support.
Advertisement
Chapters
Table of Contents
