IBM pSeries 690 Service Manual page 591

Error Code Description
406A 0007 Self tests detected fault in L3 VPD card
406A 000A Self tests detected fault in primary I/O book 1
(slot 0)
406A 000B Self tests detected fault in secondary I/O book
(slot 1)
406A 000C Self tests detected fault in I/O book 3 (slot 2)
406A 000D Self tests detected fault in I/O book 4 (slot 3)
406A 000E CUoD capacity card
406A 0010 Self tests detected fault in Memory book (slot 0) Memory book (slot 0)
406A 0011 Self tests detected fault in Memory book (slot 1) Memory book (slot 1)
406A 0012 Self tests detected fault in Memory book (slot 2) Memory book (slot 2)
406A 0013 Self tests detected fault in Memory book (slot 3) Memory book (slot 3)
406A 0014 Self tests detected fault in Memory book (slot 4) Memory book (slot 4)
406A 0015 Self tests detected fault in Memory book (slot 5) Memory book (slot 5)
406A 0016 Self tests detected fault in Memory book (slot 6) Memory book (slot 6)
406A 0017 Self tests detected fault in Memory book (slot 7) Memory book (slot 7)
406A 00B0 Self tests detected possible problem with bus
controller or CSP code
406A 00B1 Self tests detected possible problem with bus
controller
Action/
Possible Failing FRU
1. L3 VPD card
Location: U1.18-P1-H2.1
(Order the L3 cache module FRU to obtain
a new L3 VPD card. Return the L3 cache
module that was included in the FRU kit,
and the failing L3 VPD card as "new
defective".)
2. Primary I/O book
Location: U1.18-P1-H2
Go to "MAP 1540: Problem Isolation
Procedures" on page 298.
Go to "MAP 1540: Problem Isolation
Procedures" on page 298.
Go to "MAP 1540: Problem Isolation
Procedures" on page 298.
Go to "MAP 1540: Problem Isolation
Procedures" on page 298.
1. Replace the CUoD capacity card
Location: U1.18-P1-H2.2
2. Ask the customer to reenter the CUoD
activation keys.
Location: U1.18-P1-M2
Location: U1.18-P1-M3
Location: U1.18-P1-M7
Location: U1.18-P1-M6
Location: U1.18-P1-M4
Location: U1.18-P1-M8
Location: U1.18-P1-M5
Location: U1.18-P1-M1
1. Check for system firmware updates.
2. Primary I/O book,
Location: U1.18-P1-H2
3. Call service support.
1. Check for system firmware updates.
2. Primary I/O book,
Location: U1.18-P1-H2
3. Call service support.
Chapter 5. Error Code to FRU Index
571