IBM pSeries 690 Service Manual page 949

1. Place the empty PCI Adapter Cassette Assembly linkage on a flat work surface in front of you. Position
the cassette so that the handle is in the raised (up) position, and on the left, with the top of the linkage
facing away from you.
Note: Your PCI Adapter Cassette Assembly linkage might not have the short or long adapter retaining
arms installed if you removed them during the removal procedure. In the following illustration,
both arms are shown.
1
1 Handle
2 Cassette Linkage Assembly
3 Retaining Arms
2
3
Chapter 9. Removal and Replacement Procedures
929