IBM pSeries 690 Service Manual page 447

Hide thumbs Also See for pSeries 690:

Table of Contents

Error Code Description

101B FE66 BPR 2B communications fault

101B FE76 BPR 3B communications fault

101B FFx6 Cabling error on the BPC or a BPD that is not

101B x115 Power cable fault

101B x125 Power cable fault

101B x135 Power cable fault

101B x215 Power cable fault

101B x225 Power cable fault

101B x235 Power cable fault

101B x315 Power cable fault

101B x325 Power cable fault

Possible Failing FRU

Go to "MAP 1523: There Is a Bulk Power

Regulator (BPR) Communications Fault" on

Go to "MAP 1523: There Is a Bulk Power

Regulator (BPR) Communications Fault" on

There is a cabling problem on a BPC or BPD

that cannot be isolated.

The x is decoded as follows:

If x=1, the problem is on the BPC, location:

If x=2, the problem is on BPD-1, location:

If x=3, the problem is on BPD-2, location:

If x=4, the problem is on BPD-3, location:

Check the UPIC cabling on the BPC or BPD

specified by decoding the x as shown above.

Correct any cabling problems that are found.

2. If no problems are found on the A side of the

BPE, check the UPIC cabling on the BPC or

BPD in the same position on the B side of

the BPE for cabling errors. Correct and

problems that are found.

3. If both sides of the BPE are cabled correctly,

call service support.