d. Slide the top rear clip of the card arm downward to engage the top corner of the card. The card
should now be securely stabilized in all the clips, as shown in the following illustration.
e.
1 Short Card Arm Top Clip
2 Short Card Arm
3 Long Card Arm Top Clip
4 Long Card Arm
5 Long Card Arm Bottom Clip
5. Tilt the top of the bezel away from the PCI card while lowering the bottom of the tailstock into bottom
of the bezel, as shown in the following illustration.
914
Eserver pSeries 690 Service Guide
1 Adapter Cassette Bezel
2 Short Card Arm
3 Long Card Arm
6 Short Card Arm Bottom Clip
7 Short Adapter Card
8 Bottom Front Clip
9 Adapter Cassette Bezel
10 Front Top Clip