IBM pSeries 690 Service Manual page 947

2. Remove the adapter or blank filler from the cassette linkage assembly by rotating the bottom of the
tailstock out, as shown in the following illustration. Store the adapter or blank filler in a safe place.
3. The removal procedure for the PCI adapter cassette assembly is complete. To install a new adapter or
blank filler in the cassette, go to "Installing a New Hot-Pluggable PCI Adapter" on page 906.
1
3
1 Cassette Linkage Assembly
2 Bottom of Tailstock
3 Handle
2
Chapter 9. Removal and Replacement Procedures
927