IBM pSeries 690 Service Manual page 798

Notes:
1. The plug count will be 0 for those positions in which L3 cache modules and MCMs have never been
installed.
2. If MCM and L3 modules are removed from the system and not replaced, those plug counts are
retained until they are manually changed.
A screen similar to the following will be displayed. In this example, all four MCMs and all 16 L3 modules
are shown.
1. L3_13:7 2. L3_0:7
6. L3_14:7 7. L3_3:7
10. MCM_3:1
12. L3_15:7 13. L3_10:7 14. MCM_1:7
17. L3_12:7 18. L3_9:7
50. Commit the values and write to the VPD
98. Return to Previous Menu
The format of the preceding menu entries is the menu index number followed by the plug count after
the colon. The following table matches the index number with the physical location codes.
Menu Index Number
1. L3_13
2. L3_0
3. MCM_0
4. L3_1
5. L3_4
6. L3_14
7. L3_3
8. L3_2
9. L3_7
10. MCM_3
11. MCM_2
12. L3_15
13. L3_10
14. MCM_1
15. L3_11
16. L3_6
17. L3_12
18. L3_9
19. L3_8
20. L3_5
778 Eserver pSeries 690 Service Guide
MCM/L3 Interposer Plug Count Menu
3. MCM_0:7 4. L3_1:7
8. L3_2:7
11. MCM_2:1
15. L3_11:7 16. L3_6:7
19. L3_8:7
5. L3_4:7
9. L3_7:7
20. L3_5:7
Physical Location Code
U1.18-P1-C5
U1.18-P1-C6
U1.18-P1-C1
U1.18-P1-C7
U1.18-P1-C8
U1.18-P1-C9
U1.18-P1-C10
U1.18-P1-C11
U1.18-P1-C12
U1.18-P1-C2
U1.18-P1-C3
U1.18-P1-C13
U1.18-P1-C14
U1.18-P1-C4
U1.18-P1-C15
U1.18-P1-C16
U1.18-P1-C17
U1.18-P1-C18
U1.18-P1-C19
U1.18-P1-C20