Setting The Audio Path; Setting Dialing Options - Avaya 9601 Instructions Manual

Setting the audio path

You can set your phone to go off-hook on the Speaker or the Headset when you make an on-
hook call.
Procedure
1. Press Avaya Menu.
2. Select Options & Settings or Phone Settings.
3. Press Select or OK.
4. Select Call Settings.
5. Press Select or OK.
6. Select Audio Path.
7. Press Change or OK or use the Right/Left arrows to change the Speaker or
8. Press Save.

Setting dialing options

About this task
Your phone has two dialing options. You can dial as you normally would, for example, pick up
the handset, get a dial tone, and dial the number you want (off-hook dialing). Or, you can set
"edit dialing" which mimics how you dial a call on a cell phone - you can enter all or part of the
number, backspace to correct a digit if needed, and when ready, initiate the dialing process
using a softkey.
Note:
Edit dialing may not be available to you, depending on how your system is administered.
Procedure
1. Press Avaya Menu.
2. Select Options & Settings...
3. Press Select or OK.
4. Select Call Settings.
5. Press Select or OK.
6. Select Dialing options.
Using Avaya 9601 IP Deskphone SIP
Headset setting.
Using options and settings
November 2013 21