Ip Office Ip Phones; Introduction - Avaya 4600 Series Installation Manual

IP Office IP Phones

Introduction

This guide covers the installation of Avaya H.323 IP phones on IP Office systems. Currently the following
Avaya H.323 IP phones are supported on IP Office 3.1.
H.323 IP Models
Phones
4600 Series 4601, 4602, 4602SW,
4606, 4610SW, 4612,
4620, 4620SW, 4621SW,
4624.
5600 Series 5601, 5602, 5602SW,
5610SW, 5620, 5620SW.
3600 Series 3616 and 3626.
IP Office Phone Manager
PC
Softphone Pro PC Softphone
Other H.323 IP telephony devices are supported through the entry of an IP Office IP Endpoint license
into the IP Office configuration. However no functionality on these devices beyond basic call answering
and making is guaranteed by Avaya. Therefore installation of these devices should be thoroughly tested
before any customer deployment.
The maximum number of H.323 IP phone devices supported by any IP Office system is based on that
system's maximum capacity for extensions of any type minus the number of non-IP extensions installed
on the control unit and any expansion modules. The number of simultaneous calls between IP and non-
IP devices will also be limited by the number of VCM channels installed in the IP Office control unit.
IP Phone Installation
IP Office 3.1
Note
These are Avaya H.323 IP phones supported on a number
of Avaya telephone systems.
These are Avaya H.323 IP phones that are supported on
IP Office only.
These are 801.11b wireless H.323 IP phones. They work
with a Avaya Voice Priority Processor unit (AVPP) and a
range of wireless access points.
This is a VoIP enabled installation of the IP Office Phone
Manager software. It is not covered in this manual. Refer to
the Phone Manager Installation and Maintenance Manual
for details.
IP Office
Control Unit
Small Office Edition
IP403
IP406 V1
IP406 V2
IP412
Maximum Maximum
Extensions VCM channels
28 3 or 16.
100 20
180 20
190 30
360 60
Issue 11c (14th September 2005)
Page 5