B1
ON-VEHICLE MAINTENANCE
6. Install the cylinder head bolts. Tighten the bolts in the
sequence shown in the figure in three steps.
Tightening torque:
Step 1 : 70 N.m (7.1 kgf.m, 52 ft-lbf)
Step 2: 70 N-m (7.1 kgf-m, 52 ftelbf)
Step 3: Turn all cylinder head bolts an
additional 90-100
degrees, in sequence.
Cylinder head cover
1. Clean the gasket surfaces of the cylinder head cover and
cylinder head.
2.
Install the cylinder head cover gasket.
3. Install the cylinder head cover.
Tightening torque:
9-13
N.m (0.9-1.3
kgf-m, 80-1 15 in-lbf}