Cylinder Head Assembly (3.0L); Valves Installation (3.0L) - Mazda B-Series 1997 Workshop Manual

ASSEMBLY
CYLINDER HEAD
1.
Assemble in the order shown in the figure, referring to Assembly Note.
2. Install the rocker arms, referring to Assembly Note. (Refer to page B2-57.)
FRONT OF ENGINE
r )
I
MB1284-A
I
5BUO02-078
1. Valves
4.
Valve spring seat
Assembly Note ................................ below Assembly Note ...................... page B2-57
2. Valve seals
5. Valve keepers
Assembly Note ...................... page B2-57 Assembly Note ...................... page 82-57
3.
Valve springs
6. Cylinder head
Assembly Note ...................... page B2-57
Assembly Note ...................... page B2-58
Assembly Note
Valves
1. Apply clean engine oil to all valves before installation.
2. Apply grease to the valve tips before installation.
3. Install each valve in the port from which it was removed or
to which it was fitted.
4BUO02-1 35