Intake Air System (2.3L) - Mazda B-Series 1997 Workshop Manual

INTAKE AIR SYSTEM
INTAKE AIR SYSTEM
PREPARATION
SST
49 UNOI 052
Spring lock
coupling
tool
(%
in)
For
fuel supply
line removal
49 UNOl 051
Spring lock
coupling
tool
(%
in)
COMPONENTS
Removal / Inspection / Installation
1. Disconnect the electrical connector from the following parts:
-
Mass air flow sensor
-
Intake air temperature sensor
-Throttle position sensor
-
Idle air control solenoid
2. Disconnect accelerator cable. (Refer to page F1-5.)
3. Remove in the order shown in the figure, referring to Removal Note.
4. Inspect all parts and repair or replace as necessary.
5. Install in the reverse order of removal, referring to Installation Note.
For
fuel return
line removal