Radiator Inspection (4.0L); Radiator Installation (4.0L) - Mazda B-Series 1997 Workshop Manual

E3
RADIATOR
INSPECTION
Radiator
Check for the following and repair or replace as neces-
sary:
1.
Cracks, damage and water leakage.
2. Bent fins (repair with a screwdriver).
3. Distorted and bent radiator inlet and outlet.
6BUOE3-005
lnstallation Note
Note
When installing a new radiator, transfer the oil
cooler line fittings from the old radiator and install
them on the new radiator.
5BUOE3-003
Radiator hose, upper
Position the hose on the radiator neck so that the stripe on
the hose is at the 12 o'clock position.
4BUOE3-018
Radiator hose, lower
Position the hose on the radiator with the stripe on the
hose at the 6 o'clock position.
4BUOE3-019
Steps After lnstallation
1. Fill the radiator with the specified amount and type of engine coolant. (Refer to page E3-5.)
2. Connect the negative battery cable.
3. Start the engine and check for leaks.
4. Bleed the cooling system. (Refer to page E3-6.)
6BUOE3-006