Inspection Of Transfer Case Oil; Replacement Of Transfer Case Oil - Mazda B-Series 1997 Workshop Manual

SCHEDULED MAINTENANCE SERVICES
A
INSPECTION OF TRANSFER CASE OIL
Remove the filler plug. Verify that the oil level is near the
filler plug hole. If it is low, add the specified oil.
Fluid specification: ATF DexronBII or M-I11
REPLACEMENT OF TRANSFER CASE OIL
1. Remove the filler plug and drain plug.
2.
Wipe the plugs clean.
3.
Apply sealant to the threads of the drain plug and filler
plug.
4.
After the fluid has drained, install the drain plug.
Tightening torque:
19-30 N-m (1.9-3.0 kgf-m, 15--20 ftelbf}
5. Add the specified oil from the filler plug hole until the level
reaches the bottom of filler plug hole.
Fluid specification: ATF DexronBII or M-I11
Capacity:
1.2 liters {2.5 US pt, 2.1 Imp pt)
6.
Install and tighten the filler plug.
Tightening torque:
19-30 N-m (1.9-4.0 kgfem, 15-20 ft-lbf)
4BUOAX-059