Thermostat Removal/Installation (3.0L) - Mazda B-Series 1997 Workshop Manual

THERMOSTAT
THERMOSTAT
REMOVAL
/
INSTALLATION
Caution
Position the hose clamp in the original position on the hose, and squeeze the clamp lightly
with large pliers to ensure a good fit.
1. Disconnect the negative battery cable.
2. Drain the engine coolant.
3. Remove in the order shown in the figure.
4. Install in the reverse order of removal, referring to lnstallation Note.
GASKET,
REPLACE
N-m (kgf.m,
ft.lbf)
ME1014-B 4BUOE2-020
1. Radiator hose, upper
4. Gasket
2. Thermostat cover Installation Note .................... page E2-12
Installation Note .................... page E2-12
3.
Thermostat
Inspection .............................. page E2-1 1
Installation Note .................... page E2-12