Crankshaft Position Sensor Removal (2.3L) - Mazda B-Series 1997 Workshop Manual

ELECTRONIC IGNITION SYSTEM
G
Removal
2.3L
1. Disconnect the negative battery cable.
2. Remove the generator.
3. Drain the cooling system.
4.
Remove water outlet tube.
5. Disconnect the crankshaft position sensor harness connector.
6. Remove the crankshaft position sensor bolt.
7. Pry the crankshaft position sensor from the engine front cover
FRONT OF ENGINE
MG1094-A
Q -
5BUOGX-036