Shift Cam Assembly; 2W-4W Lockup Assembly And 2W -4W Shift Fork - Mazda B-Series 1997 Workshop Manual

ELECTRONIC
SHIFT
TRANSFER CASE
Shift cam assembly
1. Slide the spacer onto the shift shaft.
2. Place the torsion spring on the shift shaft.
SPACER S H I ~
SHAFT
FIRST SPRING TANG
3. Position the first spring tang on the left of the drive tang.
SPRING
DRIVE
TANG
SHIFT FORK
dJ1053-A
7. Position the spring tangs and drive tang.
SECOND SPRING TANG
I I
MJ1055-A 4BUOJ2-108
2W-4W lockup assembly and 2W-4W shift fork
Install the 2W-4W lockup assembly and the 2W-4W shift
fork as an assembly.
MJ1048-A 4BUOJ2-I 09
J2-46
4. Position the second spring tang on the right of the drive
tang.
5. Push the torsion spring and spacer onto shift shaft.
6. Install the pin on the shift shaft into the hole in the transfer
case.
Note
The spring tang and drive tang should point toward
the transfer case touching the H-L shift fork.