Mazda B-Series 1997 Workshop Manual page 343

COOLING FAN AND CLUTCH
Removal Note
Cooling fan
1. Remove the two fan shroud attaching screws and lift the
fan shroud out of the two lower attaching clips.
2. Remove the nut attaching the clutch to the water pump
using the SST.
Caution
The nut which attaches the clutch to the water
pump shaft has a left-hand thread and must be
rotated clockwise for removal.
Installation Note
Cooling fan
1.
Install the cooling fan to the water pump.
Tightening torque:
6 - 8 N-m (61.2-81.6 kgfxm, 53-70 in-lbf)
2. Install the clutch on the water pump using the SST.
Tightening torque:
41-1 35 N
.
m
(4.1 -1 3.8
kgf
-
m, 30-1 00 ft
.
Ibf)