Cylinder Block (Internal Parts) Disassembly - Mazda B-Series 1997 Workshop Manual

B1
DISASSEMBLY
CYLINDER BLOCK (INTERNAL PARTS)
Disassemble in the order shown in the figure, referring to Disassembly Note.
MB1213-D
1
.
Connecting rod cap
........................... Disassembly Note below
2. Connecting rod bearing
............................. Inspection page B1-45
3. Piston ring
Disassembly Note ................ page B1-35
4. Piston pin
................ Disassembly Note page B1-35
Inspection ............................. page B1 -43
5. Connecting rod
................
Disassembly Note page B1 -35
Inspection
.............................
page B1-43
I
5BUOB1-053
6. Piston
Inspection ............................. page B1-41
7. Main bearing caps
Disassembly Note ................ page B1-35
8. Main bearing and thrust bearing, lower
9. Crankshaft
Inspection ............................. page B1-44
10. Rear oil seal
11. Main bearing and thrust bearing, upper
12. Cylinder block
Inspection ............................. page B1-40
Disassembly Note
Connecting rod cap
Before removing the connecting rod caps, measure the
connecting rod side clearance. (Refer to page B1-53.)
5BUOB1-102