3St/2Nd Shift Rods Installation; 5Th/Reverse Shift Rods Installation - Mazda B-Series 1997 Workshop Manual

TRANSMISSION
J1
r\
5THIREVERS5 SHIFT FORK
1 stl2nd shift rods
1. Position the shift rod into the control case.
2.
Position the tletent ball and spring into the control case
spring seats.
3. Compress the detent ball and spring assembly and push
the shift rod into position over the detent ball.
4. Engage the 1 sU2nd shift fork with the shift rod.
5. Position the friction device and spring into the control case
spring seats.
6. Compress the friction device and spring assembly and
push the shift rod into position over the friction device.
7. lnstall the 1stMnd shift gate.
8. Install the 1 stl2nd shift fork spring interlock pins.
Sthlreverse shiift rods
1. Position the shift rod into control case.
2. Position the detent ball and spring into the control case
spring seats.
3. Compress the detent ball and spring assembly and push
the shift rod into position over the detent ball.
4. Engage the 5thlreverse shift fork with the shift rod.
5.
lnstall the Eithlreverse shift gate.
6. lnstall the 5thlreverse shift fork spring interlock pins.
4BUOJ1-039
I
MJI 144-A 4BUOJ1-037
1
Dust cover
Install the dust cover
DUST
COVER
Tightening torque:
8-1 1 N-m (0.8--1.1 kgf-m,
6 - 4
ft-lbf}
4BUOJ1-040
Back-up light switch
Apply sealant to the threads and install.
Tightening torque:
2 5 - 4 5 N-rn (2.5-3.4 kgfem, 18-25 ftdbf)
4BUOJ1-041
Parklneutral position switch
Apply sealant to the threads and install.
Tightening torque:
25-35 N-M (2.5-3.4 kgf-m, 18-25 ft-lbf)