2W-4W Shift Fork And Lockup Assembly; Chain, Drive Sprocket And Front Drive Sprocket; Rear Output Shaft, Pump Assembly And Oil Pump Filter; Oil Pump Drive Pin - Mazda B-Series 1997 Workshop Manual

52
MANUAL SHIFT TRANSFER CASE
Bearing
Remove the bearing using the SST
Note
SST number: 49 H033 101 Step Plate Adapter Set
2W-4W shift fork and lockup assembly
Remove the 2W-4W lockup assembly and 2W-4W shift
fork as an assembly.
Chain, drive sprocket and front drive sprocket
Remove the chain, drive sprocket and front drive sprocket
as an assembly.
I
I
MJ1020-A 4BUOJ2-034
Rear output shaft, pump assembly and oil pump filter
1.
Remove the rear output shaft, pump assembly and oil filter
as an assembly.
2. Remove the oil pump assembly from the rear output shaft.
Oil pump drive pin
1. Measure and record the height of the oil pump drive pin
prior to removal.
2. Remove the oil pump drive pin.
4BUOJ2-036