Table of Contents
Advertisement
H
CLUTCH PEDAL
CLUTCHPEDAL
ADJUSTMENT
Height, Free Play
The hydraulic clutch system locates the clutch pedal and
provides automatic clutch adjustment. The clutch actua-
tion system does not have free play; it is automatically
self-adjusting and will not require any routine service
throughout the life of the clutch. No adjustment of clutch
linkage or pedal position is required.
4BUOHX 008
REMOVAL / INSTALLATION
1. Remove left side plastic kick panel.
2. Disconnect the clutch master cylinder push rod by prying the retainer bushing and push rod off of the
pedal.
3. Remove the bolts securing parking brake mechanism. Swing the mechanism out of the way.
4. Remove in the order shown in the figure.
5. Inspect all parts and repair or replace as necessary.
6. Install in the reverse order of the removal.
L
2
MH1002-C
5BUOHX 005
1.
Retaining ring
2.Clutch pedal and shaft assembly
Advertisement
Table of Contents
Troubleshooting
